HOME > DPN PRODUCT > Wavion Wireless 2.4 GHz solution

ۼ : 10-02-05 18:33
Wavion WBS-2400 Omni Operating in the 2.4GHz
 Model : WBS-2400 Omni

WBS-2400 Omni Base Station
 Wavion WBS-2400 base station is an advanced wireless broadband base station operating in the 2.4 GHz unlicensed band.
Based on an array of 6 antennas and 6 radios, the WBS-2400 leverages Wavions beamforming technology to provide extended range and superior connectivity in both Line-of-Sight (LOS) and Non-Line-of-Sight (NLOS) conditions.
Furthermore, Wavions advanced SDMA technology doubles the base stations downlink capacity. These unmatched characteristics enable service providers, municipalities, and governments to deliver high quality, Wi-Fi service with significantly fewer base stations at a much lower cost. 

Beamforming technology
 The WBS-2400 base station is the ideal solution for urban and rural Wi-Fi deployments.
Based on Wavions unique and powerful spatially adaptive beamforming technology, and operating with any off-the-shelf 802.11b/g standard based clients, the WBS-2400 provides significant performance gains in terms of range, throughput, indoor penetration and interference mitigation.
This enables service providers to offer highly cost effective Wi-Fi service without compromising quality.

• Extended range
Triple the range in comparison to conventional access points.
• Uniform coverage
Wavion beamforming technology provides high quality NLOS coverage, thus enabling a larger addressable market per base station.
• Better indoors penetration
The superior link gain enables better penetrations into buildings
• Increased throughput
The superior link gain provides higher throughput and enables larger network capacity. Furthermore, the SDMA technology doubles the downlink capacity per base
• Superior interference mitigation
The inherent spatial filtering of the beamforming technology and the unique dynamic interference handling capabilities ensure good operation even in noisy environments.
• Cost effective
The increased addressable market per base station, coupled with the cheaper CPEs, resulting from he better indoor penetration provide the lowest cost per line solution.
• Carrier grade
Robust and weatherproof IP-67 platform, designed to withstand extreme weather

Wavion beamforming technology focuses the energy to and from the client, on a per-packet basis.
This focusing process increases significantly the link gain and the interference resiliency of the base station.
Moreover, while conventional Wi-Fi technology suffers from the destructive effect of multipath propagation, Wavions digital beamforming technology exploits multipath to its advantage by coherently combining the signals along the different propagation paths to the client.

The WBS-2400 Omni base station has been optimized to for a wide range of applications including:
• Business connectivity
• Municipalities and Metro coverage
• Public safety (video over wireless)
• VoIP / Rural connectivity
• Internet to schools and communities
• Residential access
• Building coverage
• Hospitality

Typical application:

Wavions WBS-2400 is ideal for urban and rural installations. When properly positioned, the WBS-2400 can provide wide coverage for indoor CPEs and mobile users.
The area can be further extended by using outdoor CPEs. In this manner, the same base station can provide access to both residential and business customers.
In cases that wireline backhaul is not available at every site, Wavions powerful beamforming technology can be used for  both  the  access  and  self-backhaul. The  self-aligning capability of the beamforming technology eliminates the need for mechanical lignments. This results in a quick and simple roll out.

Specifications WBS-2400 Omni

WEP (64 bit or 128 bit)     
WPA, WPA2 : 
• Encryption: TKIP, AES 
• Authentication: Pre-Shared Key or 802.1x with RADIUS Server (EAP-TLS, PEAP, EAP TTLS)
• VPN pass-through

 Web-based configuration and management tool
 SNMPv2 with standard and Wavion MIB support
 Configuration save and restore
 Network and clients statistics
 HTTPS for Web-based management tools

Networking and QoS
Multiple SSIDs / BSSIDs
 802.1q VLAN support  
 802.1p, ToS or DSCP QoS support
 WMM support

Physical specifications
 Network Interface: 
• 1 Auto-sensing 10/100 Ethernet

•One Ethernet port LINK\ACT LED indicator 
• System Status LED indicator
• RF channel status indicator

Power input:
• PoE: 55VDC (only with Wavion PoE injector)
• AC option: 110 - 220VAC, 25W


• Operating temperature range: -40C to  +55C (up to +60C with optional sunshield)
• Storage temperature range: -45C to +85C
• Weather rating: IP67
• Wind survivability: 165 mph
• Shock & Vibration: ESTI 300-192-4 spec T41.E
• Transportation: ISTA2A


•RF: FCC 47 CFR part 15, Class C, EN 300328
• Safety: TUVus, UL 60950-1:2003, CAN/CSA-C22.2 No.60950-1-03, EN 60950-1, IEC 60950-1
• EMC: 47 CFR Part 15, Subpart B, Class B (USA), EN 301489-1, EN 300328

Physical Dimensions (without mounting brackets):

• Height: 5.5 cm
• Length: 39 cm
• Width: 36 cm
• Weight: 4.2 Kg


• IEEE 802.11b/g compliant
• Frequency band: 2.402-2.483 GHz

• 802.11b: DSSS (DBPSK, DQPSK, CCK)
• 802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK)

RX Sensitivity (typical):

Rate (802.11g)(Mbps)  Sensitivity (dBm)
    6                                   - 102.5
    9                                   - 100.5
  12                                     - 99.5
  18                                     - 98
  24                                     - 95
  36                                     - 92
  48                                     - 88
  54                                     - 86
Rate (802.11b) (Mbps)  Sensitivity (dBm)
    1                                     - 105.5
    2                                     - 103
    5.5                                  - 100.5
  11                                       - 96